Industrial Series - [Specifications | PDF Brochure]

The Dependable Mixer
Progressive compost technicians know once a proper recipe has been selected, mixing the ingredients is essential to ensure rapid decomposition and quality compost. One of the major benefits of mixing is to uniformly distribute nutrients and microorganisms throughout the compost pile.

The ROTO-MIX design combines gentle tumbling with quick complete mixing to save time and improve your bottom line. The ROTO-MIX conveyor can be used to build windrows or static piles. ROTO-MIX has a complete line of Industrial Mixers - one that will meet your needs today and tomorrow.

FEATURES AND BENEFITS

Particle Protector
The Roto-Mix system protects particle length with less grinding or compaction. Particle size and porosity are critical because it determines how well air can enter and diffuse into the composting mass.

Fluff
With better air introduction and distribution, ROTO-MIX consistently produces quality compost by lifting the ingredients past the lower auger's wedge point, resulting in a fluffier mixture that starts to compost faster.

Total Mixed Compost
Our thorough mixing action eliminates dead spots, auger tunneling and corner pile-up giving a consistent balance of nutrients and microorganisms from the first yard of compost to the last.

Flexibility
Mixes all types of compost ingredients, solid waste, yard waste, food waste, sludge and amendments, animal manure and a number of other with consistency day after day.

Industrial Scale Check System
Load-cell mounting comes standard with ROTO-MIX ball and socket type tie bars to connect the mixer to the frame. This feature eliminates side and end movement on the load cells, which allow for scale dependability and accuracy.

Conveyor
Optional hydraulic folding conveyor up to 120" long gives you ability to build windrows, static piles or load trucks fast and efficiently. We also have a portable stand-alone conveyor for stationary models.

Clean-Out
The forward pitch rotor design, adjustable UHMW wiper blades, and the rotation of the lower auger quickly and efficiently clean-out the mixing chamber.

Easy Access Rear Doors
The single lever latch makes inspection easy and desirable compared to other little latches or hardware.

Single Point Grease Bank
Allows quick lubrication from a single point. Heavy-duty drive assembly runs in an enclosed oil bath.

Lower Center of Gravity
A lower center of gravity makes for a more stable unit when feeding and less shock load when cornering.

Forward Pitched Rotor
The rotor lifts feed up to the side augers that move the feed from end-to-end for thorough mixing. The lifting action of the rotor eliminates wedging of the hay or long cut feeds under the lower auger. Patented tumbling design reduces mixing power requirements.

Industrial Duty Drive Train
Splined shafts eliminate shearing of keys and gaulding of shafts. Heavy-duty chains and bearings extend life and reduce down time.

Industrial Flighting
3/4", 5/8" and 1/2" flighting available for lower auger to extend life. Top augers available in 3/8" and 1/2" flighting.

Flared Side
The flared side allows feed to tumble out of the rotor speeding up the mixing action and reducing the chance for feed to get trapped inside the rotor.

Full Scale Frame
Sturdy box frame construction with rectangular tubing for increased stability and weighing accuracy. Scale frame assembly allows scale frame to float independently of truck frame.

Rugged Dependability

Only two augers with one-half to two-thirds less flighting than most conventional auger mixers.

The patented rotor lifts material up to the side augers that move the material from end-to-end for thorough mixing. The lifting action of the rotor eliminates wedging of bulky materials under the lower auger.

A low center of gravity puts less shock load on the axle and springs when cornering or driving over rough terrains. Rotor is equipped with spring tension bars to relieve pressure and eliminate wedging of bulky materials. UHMW wiper blades are adjustable for a fast, effective clean-out.

Extra heavy wall auger tubes give maximum life and less maintenance.

Patented tumbling action allows easier pulling mixer action, reducing the load on the transmission, PTO, and driveline.

ROTO-MIX units have two automotive type drive shafts from a truck PTO to one heavy-duty gear reducer.

The rotor design keeps the lower side auger at full capacity, giving quick clean-out.

The extra heavy-duty drive assembly runs in an oil bath. A grease bank allows easy access to all drive assembly bearings.

Lower auger and rotor have double tapered roller bearings and both augers are flanged for easy removal over the top.

Quality - "It's Built In"

Trailer Features

• Single pole tongue allows for a tight turning radius.
• Trailer constructed of heavy-duty tubular steel with built in scale mountings.
• Heavy-duty hubs and spindles designed for years of trouble free operation. A wide selection of tire choices.
• Rear bumper is standard equipment.
• Short wheelbase allows for tight turns and easy maneuverability.
• Adjustable hitch device allows the operator to level mixer with most tractors to maximize mixer efficiency.
• Heavy-duty, tubular trailer frame ensures long life and maximum scale accuracy.
• Weigh bar scale or load-cell mounting.
• Load cell mounting comes standard with Roto-Mix ball and socket type tie bars to connect the mixer to the frame. This feature eliminates side and end movement on the load cells, which allows for scale dependability and accuracy.
• Heavy-duty leaf spring suspension on 2670 and 3410 units.

Stationary Units

• Higher side discharge location allows easier loading of conveyors or elevator legs while maintaining a minimum mixer height.
• Left and right discharge units available.
• Low electric horsepower requirements.
• Flexible motor mount designs to keep overall space requirements to a minimum.
• Wide base scale frame.

Options

• Door - Wide door openings allow fast feed delivery with easy hydraulic control while mixer is running.
• Spouts - Gravity discharge spouts have no moving parts. Wind exposure is reduced compared to other units throwing feed to the cattle.
• Magnets - Trap foreign metal before it reaches the feed bunk.
• Ladders to aid in inspection of mixing chamber.
• Stainless steel liners for mixing chamber.
• Rotor options of 3, 5, and 6 bar to match the ration density and improve mixing speed and performance.

[Click here to view Specifications]