The best way to deliver premixed feed.

Photo 1200-20 Commercail Series Feeder

Commercial Series Feeders

620 to 1200 cu. ft.

Designed with commercial cattle feeders in mind, this rugged unit uses two 30" diameter low speed augers in the bottom, bringing the feed forward without a boiling action to two cross augers. The cross augers then move the feed to the discharge conveyor for fast, efficient and even feed delivery. With ROTO-MIX, there are no high wear, high maintenance and high cost floor chains.

Standard Equipment

  • Fenders
  • Formed wrap-around rear bumper
  • Mud flaps
  • Full length scale frame
  • Clearance lights
  • Spout magnets
  • Spout rubber
  • Ladder

Optional Equipment

  • Heavy-duty front bumper with bunk roller
  • Hydrostatic drive
  • Stainless steel liners
1200-20 Commercial Feeder

Specifications

Commercial Feeders 800-14 1000-16 1200-20
Weight—Installed (Estimated) 11,000 lbs. 12,800 lbs. 16,000 lbs.
Cubic Foot Capacity 620 750 885
Cubic Foot Capacity with 12" Extension 740 880 1,100
Cubic Foot Capacity with 18" Extension 800 950 1,200
Cubic Foot Capacity with 24" Extension 850
Inside Length 168" 192" 240"
Overall Length, Feeder Only 194" 218" 266"
Inside Width 96" 96" 96"
Overall Width, Feeder Only 102" 102" 102"
Overall Width, Spout Up 115" 115" 115"
Height on 40" Truck Frame (Without Extensions) 115" 115" 115"
Discharge Opening Width 42" 42" 42"
Auger Bottoms ¼" ¼" ¼"
Lower Auger Ends ¼" ¼" ¼"
Upper Auger Ends 3/16" 3/16" 3/16"
Sides 7 Ga. 7 Ga. 7 Ga.
Auger Tube O.D. and Wall 6 5/8" x 7/16" 6 5/8" x 7/16" 8 5/8" x 1/2"
Auger Flights ½" x 30" O.D. ½" x 30" O.D. ½" x 30" O.D.
Auger Drive-Roller Chains #120 #120 #140
Auger Shaft–4140 Spline with Double Roller Bearings 3½" Spl. 3½" Spl. 4" Spl.
Cross Augers 9" O.D. 9" O.D. 9" O.D.
Cross Auger Drive-Roller Chain #60 & #80 #60 & #80 #60 & #80
Discharge Conveyor Augers 9" O.D. 9" O.D. 9" O.D.
Discharge Conveyor Drive #50 #50 #50

All dimensions and specifications are approximate and subject to change without notice.

Copyright © 2016 — All Rights Reserved